FULCRUM Suspension stocks SuperPro’s upper and lower control arm kits.
These kits have been designed to cover a large range of vehicles. Don’t waste time with any other control arm – get the perfect alignment solution from Fulcrum. When you get a lift kit installed, you deserve the best.
Why only have half the job done to correct your wheel alignment with a control arm that merely offers static caster correction?
Get the job done properly with SuperPro’s fully adjustable 4×4 control arms! These arms come with complete camber and caster control and are designed to give your 4×4 the best wheel alignment settings and increased clearance.
Both upper and lower control arm kits are available in the SuperPro range across a wide variety of vehicles. These arms are supplied with the camber and caster adjustable ball joints and are fitted with SuperPro bushings. The design of these control arms has removed the common issues usually faced with getting the correct alignment and clearance.
SuperPro 4×4 control arms deliver up to 3 degrees of caster along with extra camber, allowing for the optimum alignment setting for a 2”-lifted vehicle. So not only do these arms provide better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
Don’t waste time with any other control arm, get the perfect alignment solution from Fulcrum with these SuperPro arms that are built tough in Australia using high-strength, OE-grade Australian steel.
- Increased articulation, perfect for the off-road environment;
- Provides for camber and caster adjustment using an adjustable ball joint;
- Increased clearance between spring and control arm at full articulation;
- SuperPro bushings; and
- Made in Australia.
SuperPro has this full adjustable solution for almost every 4×4.
Visit fulcrumsuspensions.com.au today to get yours or visit the display at Stands F2/F4!